Lubric8 Hammer Grease
Semi-synthetic Based Grease
           
Product Description:
 
Specially developed using a blend of semi-synthetic base oil manufactured with high temperature thickener containing a high level of graphite to extend lubrication periods. It is designed particularly for hydraulic hammer lubrication, pin and bush type of applications, on large earth moving and general off-road heavy plant machinery. Enhanced by the addition of laminar lubricating solids, and it’s adhesive properties resist water wash off. This product has also found use in the lubrication of open gears.
 
Applications:
 
Can be applied manually, or by using a standard grease gun (400gm cartridges available). As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge bearings prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the bearing manufacturer.
 
Typical Test Data:
 
Base Oil
Semi Synthetic
Base Oil Viscosity (cSt) @ 40°C
950
Colour
Black
Dropping Point (°C)
280
Four Ball Weld Load (Kg)
550
NLGI Classification
2/ 3
Thickener
Inorganic
Solids Content (%)
10
Worked Penetration 0.1mm
230 to 260
Working Temperature range °C
-5 to 160
 
Working temperature up to 600°C as a dry film lubricant.
 
Benefits:
 
High degree of water resistance.
Reduced leakage tendency.
Excellent load carrying capability and shock load resistance.
Good sealing properties in dusty conditions.
Inherent adhesive nature.